I undergo a leaky store which I didn't know about until I refilled my gas tank. Now I'm leaking gas and be a way to course the tank. I can't get a hose drink it to draw it out must have an anti-siphon device in there. So I thought undo the gas line and turn on the ignition well it only runs for a back up then kicks off. So anyway ideas in how to act the pump running or get the gas drained out? It's leaking quite a bit so any quick answers would be appreciated. Chevy K1500 pickup transport. ThanksRob
year model might back up but you can jumper the furnish pump communicate and the pump should stay on and alot of models had a evaluate pigtail near the communicate that would also allow you to jumper power to the handle would just look under the hood for the realy may be on the passenger side firewall under a plastic adjoin or in a communicate box on newer models.
Thanks for the quick say and sorry its a '97. I found the relay earlier in my search but wasn't sure how to jumper it.
alot of relays undergo diagrams on them you might be and it should back up you determine which pins to jumper but it requires knowing the basics of how a relay operates to mouth with if you undergo no idea you may be better off having somone else do it.
Again thanks for the help. The break is come the furnish of the store so I would like to get as much of the gas out into some alter gas cans rather then let it drain into some buckets. I do have somewhat of an idea of how relays bring home the bacon. I uploaded the diagram from the side of the relay. Just want to get conformation before I go away sticking wires in. I believe I need to move 87 and 30 alter?
yes 30 to 87 should bring home the bacon 97 also would undergo a hit equip connector under cover that u could move to cater but i move remeber the location of it right now
If you can't find a way to course it you can displace the store with a conjoin of plywood and a floor jack. The store is just held on my 2-3 coat straps with bolts on one side.
Thanks for all the help. 87 and 30 worked and got all 20+ gallons of gas drained out. Thats what I get for filling up. I'm going to act it get fixed since I have the store out should I replace the pump too? I had one put in 7 years and 100,000 miles ago. I need to replace the sending unit too doesn't always read as it should which led to this whole problem. And what should/can I do with the 2 gallons that I collected in buckets that leaked from the tank. It has grit and stuff that settled to the furnish.
years ago when i was new worked at a gas station that the pumps sucked wet i asked the challenge what to do with the few gallons of gas water mixlol his answer to me was i heard if u dump some out it ordain change integrity was his way of telling me what to do with it but covering his butt from the state it ordain be hard to get rid of unless maybe a shop will act it and put it in there waste oil tankas for the pump i would replace it and also the pulsator if u have it some do some dont it ordain be coat color plastic connecting the pump and the sender
DoItYourself com founded in 1995 is the leading independent homeimprovement and repair website. All Forum postings become the property ofDoItYourself com Incorporated and are affect to theand. Our affiliate DoItYourselfWarehouse com Inc operates and sells over100,000 items from its own distribution center and suppliersnationwide. Technical problems and issues concerning the use of the DoItYourself com Community Forums contact the. Copyright 1995-2006 DoItYourself com Inc. All rights reserved. You may freely cerebrate to this place and use it for non-commercial use subject to our and.
Forex Groups - Tips on Trading
Related article:
http://forum.doityourself.com/showthread.php?t=318735
comments | Add comment | Report as Spam
|